Third brake light

[SPORTCRAZIE]

I just sprayed my tail lights with that smoked tail light spray it looks good...My question is does anyone know how to remove the third brake light cover?I want to hit that too with the spray.

 

[Hartman]

If there are no screws on it, I would just mask it off and spray it. That's how I had to do it since the third brake light on 2nd gens is very hard to remove.

 

[Black Magic]

Yea, just mask it off and spray it. That is how I did mine. Make sure to cover everything.

 

[SPORTCRAZIE]

Allright I taped everything up and sprayed the light...Now the weather guy is saying rain.The can says 6 hours to set,Does it really need 6 hours to set?Because if it rains I think I'm screwed.

 

[ERIK2173]

I took mine off to spray it, But it was a bit more difficult.
I had to pull the plastic molding off the inside of the door. Then remove the two screws that hold it in.
In order to remove it completely I had to loosen the rear window.

I didn't wait nearly six hours. It was maybe an hour.
You should be fine.

 

[Black Magic]

I am sure you are fine Sportcrazie. Good job!

 

[EliteConcept]

what did you use and where did you get it at?

 

[SPORTCRAZIE]

I used Nite shades by VHT any auto parts store should have it.

 

[rocket 5979]

Too late now. But you could have just taped a piece of plastic bag over it before it rained. And just had something waddedup under it to keep it off of the newly painted surface.