fabianoliver
Elite Explorer
- Joined
- July 28, 2022
- Messages
- 217
- Reaction score
- 189
- City, State
- Montevideo - Uruguay
- Year, Model & Trim Level
- 1994 XLT
Hello all, today i checked the tps to know if it's ok, cause i'm investigating high consumption.
It's strange cause the conector doesn't "clicks" into the sensor, it stays firm but without a click, to remove it i've just pulled, no need to "unlock it"
I've 5V in the harness, so voltage arrives ok.
Measuring with the + in the center pin, and tyhe ground on the - battery terminal i have:
Throttle at rest: 0.94V
full trottle by hand: 4.55 V
full throttle in pedal: 4.52V
are these values ok?
here a video
Thanks all !!!!
It's strange cause the conector doesn't "clicks" into the sensor, it stays firm but without a click, to remove it i've just pulled, no need to "unlock it"
I've 5V in the harness, so voltage arrives ok.
Measuring with the + in the center pin, and tyhe ground on the - battery terminal i have:
Throttle at rest: 0.94V
full trottle by hand: 4.55 V
full throttle in pedal: 4.52V
are these values ok?
here a video
Thanks all !!!!
