trans mount for 4406

[uh60blackhawk]

I have a 97 explorer former awd with a 4406. I am looking for a heavy duty trans mount to support extra weight. Any ideas where to find one.

 

[IZwack]

Trans mount as in the bushing part? Or an entire new trans cross member and the works?

 

[Turdle]

I was looking-
I think Boomin made a nice one by trimming an F150 trans mount.

 

[uh60blackhawk]

I have a 97 explorer former awd with a 4406. I am looking for a heavy duty trans mount to support extra weight. Any ideas where to find one.

I just need the bushing. The stock bushing lasted 2 days with the added weight.

 

[rwenzing]

I used a taller 92 F150 4x4 mount but had to cut the crossmember to keep the driveshaft angles correct. Also had to countersink a couple of the extension housing bolts for clearance.

 

[Hokie]

I'm wondering if my "click/clunk" i hear when I lift off the throttle is the t-case moving and hitting the gas tank... I'm thinking the stock tranny mount is shot allowing for the driveline to flex.

 

['97 V8]

or you broke your tranny mount. im about to be going on to mount number 3...or is it 4?