Transfer case question

[ForTiLLiaN]

I am looking to replace my auto transfer case with a manual. I found one in a 93 EB being parted out that has a auto tranny. I am wondering if the hump plate will be removable so that i can place it in mine, and if this thing is going to bolt right up. Also, if i am going to be replacing my auto hubs with manuels, i found some on a 92 EX in a junk yard, with manuals installed, what will i need to take off to make it work inplace of my autos? Thanks

 

[mrboyle]

The tranny hump should be a bolt in. One thing you need to be sure you get is ALL of the ****er mechanism and the bolts that mount it. The case will be a bolt in and you shouldn't need any new parts.

For the hubs you need the hub (of course) and the nuts and lock washer that hold the wheel bearings.

 

[ForTiLLiaN]

whats the manf. and model of the manual t-case that comes with the explorers?

 

[MrShorty]

1st gen ('91-'94) use the Borg-Warner 1354 transfer case.

 

[cjbarron5]

2nd gen are borg warner 4405