TT crank'd all the way, 1.5"??

[Supergumby5000]

Okay kinda nervous/confused so i have to ask. I know that when you crank up your torsion bars, you can increase the wear and tear on your CV joints. Well, today i did the whole TT thing, and i cranked them up as tight as i THINK they can go. made them all the way up snug, but didnt crank on em too hard once i got that far. measured how high it changed and it was just shy of about 1.5 inches. does that sound right? i hear of people cranking near 3 inches out of the torsion bars.

 

[boominXplorer]

The adjustment stops when the bolt head bottoms out on the adjusters. Thats usually the 3" mark

 

[SkanlaxJMO]

usually 4wd's get about 2inches and 2wd's get the full 3

 

[Supergumby5000]

mine is cranked all the way down, got about 1.5 inches. should i be worrying about the CV joints then?

 

[SkanlaxJMO]

no because it is within the travel of the cv's

 

[explorermatt001]

you should be fine, like SkanlaxJMO said just make sure that the cv's dont bind/rub against the arm during offroading