Want to swap transfer cases...

[biggnbrittle]

I am running a 94 ford ranger 4.0/5spd/bw1354 with the electric motor... Does anyone know if the spline count is the same on the manual shift transfer cases? I am tired of having electric motors going out at the worst times and I would rather swap over to a manual shift... any advice would be helpful... thanks!

 

[RangerX]

Yup. I did it. If it's a 1354, it'll bolt right up with no problem.
Just be sure to get everything, linkage, shifter, boot, floor plate.
I pulled one from a 94 Ex in the junkyard, to replace the 1354E in my 93 Ranger.