Warrior schackle bolt hole size?

[toad]

Warrior schackle bolt hole size? Help

I,m in the middle of building my shackles and have searched and found a bolt hole size of 5/8", for some reason this dosent sound right to me , can anyone confirm this please.
Thanks, Todd

 

[toad]

This is from a thread I found-

I started drawing it in AutoCAD but got lazy...

here's the dimensions

Length: 10.25"
thickness: 7/16"
holes: 5/8"
end to center of hole: 1 7/8"
inside with of shackle: 3 1/8"
center cross brace: 3 7/16" from one end
(made out of 2" x 1 3/8" box steel)

The inside meas. dosent seem right either , if I measuere the stock ones its 2 7/8" inside.
Help

 

[Byrd91]

Bolt whole should be 9/16 I believe. Stock might be metric. The inside should be the same as stock I'd say.

 

[Hoppy]

Do you guys have any pics of these shackles?

 

[Maniak]

The bolt size changed...

When they first came out I believe they were 1/2"

Later it was discovered that they should have been 14mm and the current ones are 14mm...


The factory bolts were an odd shape which caused the confusion.

~Mark

 

[toad]

Thanks guys they are done and on the truck. I went with 9/16 hole and it fits great, I,ll try to get some pic.s