what are these bushings? (pic)

[jd4242]

what made you want to do the balljoints/bushings in the first place?
Posted via Mobile Device

 

[SwaintaN]

when i took the truck in for its alignment after i installed the lift kit, he said they couldnt get it 100% because the ball joints on the drive side were shot, and the passenger bottom was shot. so i figured i would get them and have them done so itll be aligned a little better and drive a little straighter.

haha next will be all the leaks.

 

[jd4242]

did they say balljoints or did they point out the things you cicled in your pic,because there are two balljoints on each spindle that is not what was cicled,so they could have been talking about them
Posted via Mobile Device

 

[SwaintaN]

specifically said ball joints, i noticed the circle things as i was taking off the sway bar to repaint and due new bushing for it. that the circled parts, rocked front and back really easily with me movie them.

 

[jd4242]

yea my balljoints are bad now and I also have the wrong arm so I will be doing all this soon also when I put my new drilled/sloted rotors and cailpers on
Posted via Mobile Device

 

[SwaintaN]

lol i just did rotors, calipers, pads, shoes and extended brake lines, fun fun

 

[410Fortune]

i highly recommend Mcquay Norris extreme duty ball joints for Gen I Dana 35 ttb replacements
they are a stout ball joint for a good price, finally.....

Moog = Boo!!

 

[Maniak]

Spicer is another good one, but its harder to find.. Napa does carry them..

last time Napa screwed up my order and I had to use the Mcquay Norris ones.. and they look much better than the current moog ones you can buy..

~Mark

 

[SwaintaN]

i got moog