what should i do?

[best X]

okay i have a 96 sport and im about to get a lift and all that done but were im stuck is if i should try for 6" lift and 35s or about 3"or 4" and 33s idk its a 2wd also so leme know what you guys think and i plan on geting it all done soon

 

[trj360]

personally, i'd do a torsion twist, spindle lift, spring over axle, and a 3" body lift and put some 35s on. Also, if you plan to off road with it, having 2wd and a rear locker is better than 2wd with no locker.

 

[askingxforxit]

IMO you should go with the 33's. The V6 has good power but if you go to the 35's you might end up spending a ton more money on engine mods to spin the 35's over obstacles. Try and search the forum for some pics so you can see what it would look like.

Good luck, post pics when you get the work done!!!!

 

[01slvrsprt]

personally, i'd do a torsion twist, spindle lift, spring over axle, and a 3" body lift and put some 35s on. Also, if you plan to off road with it, having 2wd and a rear locker is better than 2wd with no locker.

I checked a few diffent websites and couldnt find a spindle lift. Do you know were you can get one? Did you use it?

 

[trj360]

I checked a few diffent websites and couldnt find a spindle lift. Do you know were you can get one? Did you use it?

No, my truck is in my sig. I have no idea where to get the kit, as far as I've heard they are hard to find.

 

[01slvrsprt]

No, my truck is in my sig. I have no idea where to get the kit, as far as I've heard they are hard to find.

ok thanks

 

[best X]

wow thanks a lot and yeah 35s look trick as hell and ill show before and during and after pictures b/c i know you guys here die for pictures haha hopefully it will get worked on soon

 

[best X]

ive got a quick question yet again ive kinda priced out the lift for 33s but had some trouble wiht the 35s so if anyone has done it do you remember the cost and remember i have 2wd

 

[Mbrooks420]

What gear ratio do you have?

 

[best X]

uh **** i forgot uh ill have to go look but its dark out everything is stock right now i no id have to change up my gears

 

[jonlax]

IMO you should go with the 33's. The V6 has good power but if you go to the 35's you might end up spending a ton more money on engine mods to spin the 35's over obstacles. Try and search the forum for some pics so you can see what it would look like.

Good luck, post pics when you get the work done!!!!

Our V6's have plenty of power for 35" but if you have 3.27's or 3.73 you might have a problem.

 

[best X]

well ive been looking and i want to do a SOA but i cant find a accurate price i found it as low as $100 and as high as $1090 and that is a huge gap in price so i was wondering if someone can help me out bc if i can figure the SOA it would help me out a zillion
-travis-