What size rim to get

[Alec]

Nice.

That will fit with 2" and trimming. You most likely will need to trim with that width and the size of those shoulder lugs. Even then it may rub at full lock and/or under compression.

 

[eXplorerchic]

Yeh i dont mine some triming as long as not metal cutting is going to be going on.....well it does come in 31x10.5 also.... is that going to be too small for what i'm looking for?

 

[Alec]

You most likely will need to cut metal to fit the 11.50s.

Most people go with 31x10.50s with a 2" lift.

 

[eXplorerchic]

yeah....well I dont want to be cutting metal I'm going to get those baja claws in the 31x10.5 size and the 15x8 rockcrawler. If all else fells I can always add some spacers to move them out.

Anways thanks for your help, I know I've bugged you enough.

 

[Alec]

not a problem, we're here to help. Good luck!