Wheel bearing and hub assy change

[jcjcm]

Now I have an intermittent ABS light on the dash. I disconnected the battery to reset any codes and it came back after a couple days. Any Ideas? '02 XLT 4X4 with control trac

 

[sc00ter250]

are u saying u replaced the wheel bearing or not? if u did make sure u plugged in all the wires. another thing is try a rear speed sensor. it should only be around $5, thats why my light was on. but i scanned it at work to make sure

 

[jcjcm]

I did replace the wheel bearing/ hub assembly. I verified the plug connection on the inner fender, then I disconnected the positive terminal to reset the codes. Light is now intermittent. It came on while driving, but after I shut off the car, then re-started the car about an hour later, it went out.

 

[sc00ter250]

i think u should just try putting in a rear speend sensor. its on the rear differental. it has one bolt in it should be 10mm. just replace that and see

 

[jcjcm]

Thanks , I'll check it out and let u know