1meanGTA
Active Member
- Joined
- October 26, 2006
- Messages
- 83
- Reaction score
- 0
- Year, Model & Trim Level
- '98 Eddie Bauer
I managed to break my thermostat housing and had to order a replacement. The replacement came with a 45 degree water neck for the upper radiator hose, and everywhere online I've searched for a new housing for a 98 5.0 Explorer has been the 45 degree part. My stock piece is 90 degrees, and I'll need that for my radiator hose to work without hitting my fan.
I found an old thread on this with no reply, but it seems the 95 Mustang GT 5.0 thermostat housing is a 90 and will work just fine? My problem is the same as his. Is there a hose bent for the 45 that I can buy, or will a replacement Mustang part work?
http://www.explorerforum.com/forums/showthread.php?t=323378
Thanks for any help, I'm hoping to get the Explorer on the road soon, I got caught in the snow in my GTO today with summer tires, spun, and jumped a curb, I need a new wheel and fender repair
I found an old thread on this with no reply, but it seems the 95 Mustang GT 5.0 thermostat housing is a 90 and will work just fine? My problem is the same as his. Is there a hose bent for the 45 that I can buy, or will a replacement Mustang part work?
http://www.explorerforum.com/forums/showthread.php?t=323378
Thanks for any help, I'm hoping to get the Explorer on the road soon, I got caught in the snow in my GTO today with summer tires, spun, and jumped a curb, I need a new wheel and fender repair
