While changing ball joints.....

[KevinK]

I'm in the middle of changing ball joints and the right side axle would not come out. The left came out easily, but not the right. Is there a secret to the right side axle?

Thanks in advance,

Kevin

91 XLT

 

[88vert]

I made a special clamp and did it while it was still on the truck I dont think you can get that side out unless you take the axel apart

 

[KevinK]

I thought about that. Unless I get a better idea that is the method I'll try. Was it tough getting the knuckle removed or did you just have to be really careful?

Thanks,

Kevin

 

[88vert]

I have done three of them the same way and they were all pretty easy it just sucks working under the ex

 

[KevinK]

I'm a little worried that I won't be able to remove the nut from the bottom ball joint. Did you use a 24mm socket or closed end wrench for that?


Kevin

 

[88vert]

I used a socket and a breaker bar soak it with monkey piss first