fiberglass fenders??

[jd4242]

Does anyone have any pics of fiberglass front fenders on a first gen?

 

[jd4242]

Or links to a good cheap place?

 

[FIND]

You mean like flared fiberglass fenders?

http://www.mcneilracinginc.com/off-road-fiberglass/Ford/Explorer/91-94_4dr/index.htm

 

[FROADER]

I was going to post mine, but the grey one on the McNeil site is it.

 

[4wheeltom]

You can get them from fiberwerx.com

 

[jd4242]

You can get them from fiberwerx.com

Are those 6"? Do you have them on the back too?

 

[jd4242]

Will they work with stock bumpers? I was thinking fiberglass in the front and limited flares in the back

 

[FROADER]

Perry's work with the stock bumper, but you'll need to trim it a little. This is the grey one (before paint and rear glass)

with 33s:

with 35s and bushwacker flares:

 

[4wheeltom]

Yeah, they are the 6" and the rears are the 7"

 

[gmanpaint]

Do you lose the wheel well liner when running the front glass?

 

[4wheeltom]

I trimed them down so that they are flush with the inner fender and used rivets to reattach. If I had to do it again I would it again I would extend them to fit the new fenders, my door jams in the front get packed with alot of mud.

 

[explorinitup]

http://www.fiberwerx.com/html/ford/explorer/fenders.html

 

[jd4242]

Perry's work with the stock bumper, but you'll need to trim it a little. This is the grey one (before paint and rear glass)

with 33s:

with 35s and bushwacker flares:

Nice!!

 

[jd4242]

Perry's work with the stock bumper, but you'll need to trim it a little. This is the grey one (before paint and rear glass)

with 33s:

with 35s and bushwacker flares:

You have a link for those rear flares?i like that set up

 

[FROADER]

Unfortunately, I don't. They were a gift and that was in 1999... I know they are bushwackers though. Your idea of the limited flares would be close though.

 

[jd4242]

Yea i really like that look.is that the name of them or the company? Anyone have a pic of the limited rear flares?

 

[FROADER]

Yeah - www.bushwacker.com They were the extend-a-fender style.

 

[FROADER]

Found these. It's a set of all 4 though. Not sure if you can get just the rear.

http://www.sfxperformance.com/parts/BUS2190611.htm

 

[jd4242]

Yeah - www.bushwacker.com They were the extend-a-fender style.

Sweet thanks!

 

[iheartbeams]

some old pics of the front glass before i converted my front end. hanneman 4 inch flare

and heres a pic of the rear glass on there and conversion front end. glassworks front fenders, and fiberwerx rears.