blus
Member
- Joined
- December 10, 2008
- Messages
- 20
- Reaction score
- 0
- City, State
- southaven.ms
- Year, Model & Trim Level
- 98 sport
Hello everyone.
I recently aquired this expl after the third engine started losing water into the crankcase. After checking the compression showed 180 avg., I'm wondering if the intake man may be responsible. Looking at the plugs showed no water in cyls. I have posted on a previous engine for this truck which I pulled the heads and ran out of time and resources. So far, this engine runs good , with only miss from a broken sprk plug. After I pulled the upper intake, I noticed some evidence of water in the plenum. This was only at the rear of the intake. It (the water) seemed to be in the intake port of #3 cyl. I'd appreciate any thoughts or advice.
I recently aquired this expl after the third engine started losing water into the crankcase. After checking the compression showed 180 avg., I'm wondering if the intake man may be responsible. Looking at the plugs showed no water in cyls. I have posted on a previous engine for this truck which I pulled the heads and ran out of time and resources. So far, this engine runs good , with only miss from a broken sprk plug. After I pulled the upper intake, I noticed some evidence of water in the plenum. This was only at the rear of the intake. It (the water) seemed to be in the intake port of #3 cyl. I'd appreciate any thoughts or advice.