2007 and 2002 4.0 long block swap

[allmyEXes]

I'm sure the answer is in here if I dig long enough but time is limited sine 2 Sport Tracs popped up near me. One is a 2007 that needs engine work requiring removal and the other is a beat up 2002 with supposedly a good engine. What all years will swap out with the 2007 and I know that I need to keep all of the peripherals and dress of the '07 with the '07. To simplify the question, What all year 4.0 log blocks will swap out ?

 

[974X4BLACKSPORT]

Here is some good information on the 4.0L that may be helpful when doing engine swaps:
Rebuilding The Ford 4.0L Pushrod V6 - Engine Builder Magazine

 

[allmyEXes]

Thanks. I'm trying to resist the urge to transfer the 2007 body on to a 1995 F150 LWB 5.0 4x4 running chassis with straight axles and a BW 4406 etc. The wheelbase of the two trucks are within 2.5 inches of each other...

 

[allmyEXes]

I located a little more info:
Engine fitment

 

[Tech By Trade]

All of them if you strip them to a long block. 97 through 2010. Mustang, Ranger, Explorer, Sport Trac, Land Rover are all interchangeable. 2wd and Mustang dont have the balance shaft, but no one seems to notice a difference. Around here for some reason the mustang seems to go for a lot less. Not sure why.

 

[donalds]

When shopping for my remanufactured engine I noticed that in 2008 there is no oil spray bar over the cam

https://www.rockauto.com/en/catalog/ford,2007,explorer,4.0l+v6,1434497,engine,long+block,5240
https://www.rockauto.com/en/catalog/ford,2008,explorer,4.0l+v6,1441674,engine,long+block,5240