hydroxy
I like to fiddle...
- Joined
- April 23, 2002
- Messages
- 2,275
- Reaction score
- 2
- City, State
- Fairfax, VA
- Year, Model & Trim Level
- 1995 Limited v6
Got time today to do some work... I'm putting a CB, DVD player (not the drive shown in the pictures), and all the factory switches in my glove compartment. Along with whatever else I figure out to put in there. It will have a flat fiberglass face on it - as in only the actual buttons, the drive and the CB will be visible, nothing else about them. I'm going to put a switch to turn on the CB closer to the driver's seat, and run wires behind the dash so that the microphone will be closer to me.
I had to cut out a supporting bar behind the hinge so that there would be room for the wires. I'll let the pictures speak for themselves.
Here is the HVAC controls relocated. The HU will be serveral inches lower then shown in the pictures.
I had to cut out a supporting bar behind the hinge so that there would be room for the wires. I'll let the pictures speak for themselves.
Here is the HVAC controls relocated. The HU will be serveral inches lower then shown in the pictures.