ECTED installed

[Racerx70]

Here is just some pictures from my install tonight. Took about 4 hours, including abit of trouble getting Backlash set right(Dam cast shims anyway)

I you think a Detroit is unsettling, you can make a passenger just about jump out by locking this in a parking lot, going around a corner and unlocking it It unloads hard if it's bound up

Anyway, pictures:

What it replaced. A welded trac-lock.

What it went in.

Hole for the wiring to pass through.

The installed unit. Notice the location of the bolt for the center pin

I should have a trail review here in a weekend or two

 

[ExplorerDMB]

looks good. Boomin just installed one of these ECTED ones in someones Explorer. Looks like you did a good job. Hope there isn't any noise or anything.

-Drew

 

[Racerx70]

No problem, all there was to set was backlash, though it took too long to set that. I really needed three hands to do it, but alas, I only had two.

Less noise now, no squealing tires around corners.

 

[dkchrist]

sweet keep us updated as to how it works