- Joined
- April 16, 2002
- Messages
- 3,313
- Reaction score
- 41
- City, State
- British Columbia
- Year, Model & Trim Level
- 93 4 dr 4x4 manual XL.
Once I got into using the new shims I needed to bend them a little on the inside where the machined surface slopes. Normally they would bend when pressed on, so I needed them to not change when I press the new bearings on. I put them on the old carrier with one of my set up bearings, turn it over and hit the other side with a mallet, worked well..