1992 xlt new mods?

[Ahteixeira4x4]

Ok so I have done a few little things to my truck but I want advise on what eles I should do. I have it on 31's iv done the zip tie mod it has a stereo I have an exhaust on it I have a spectrum cone air filter, an a 5.5" lift coming in the near future. Would it make any difference if I changed the air filter tube from stock?

Any advise will be taken into consideration. I will upload some pics later this afternoon. Thank you in advance.

 

[SuddenDeath]

You could always get the mustang/5.0L explorer MAF and put your electronics in it. Search for that mod.

 

[Ahteixeira4x4]

Here she is.

 

[Tbars4]

...What is that cut into the ash tray??

...I'm thinking it's an equalizer but would get all fluffy inside if you told me that was a switch bank for lights and such...

 

[Ahteixeira4x4]

would I have to chang the MAF too for it to pass smog or will it pass with the 5.0 one it?

 

[Ahteixeira4x4]

its the pre-amp/ EP. I would like to put a CB right below it.

 

[bats]

ooooo shiny buttons! : First thing I recommend you do is get rid of those dreadful autohubs.

 

[Ahteixeira4x4]

bats if you have a link on how to get rid of them that will be my next thing I do. I have wanted them gone.

 

[Tbars4]

...Ton of info on hubs to be found here...
http://www.explorerforum.com/forums/showthread.php?t=232754

 

[Ahteixeira4x4]

Thanks Tbars there is a lot of good info there.

 

[iheartbeams]

what is this zip tie mod i keep hearing about? how and what does it do?

 

[Slowlyvverot]

http://www.explorerforum.com/forums/showthread.php?t=166562

 

[SuddenDeath]

To do the MAF mod you take the 5.0L maf housing and put your electronics in it. More airflow to your engine. There is a writeup here someplace...

 

[Slowlyvverot]

no writeup needed really, just grab the maf housing from a 5.0 at the junkyard. leave the sensor with the junk truck and just plug your sensor into it once you put the housing in your truck. I think the MAF from a 4.6 will work too. I have a 5.0 MAF in mine.

 

[Ahteixeira4x4]

Well I just put in new dash lights. I will get picks up later and I'm getting a new maf on saterday hopefully.

 

[Blacksheep Josh]

I'd buy the EQ of ya...

 

[Ahteixeira4x4]

well my 4x4 went out for some reason about a month or so ago, I changed the shift motor and it worked but now its out again. any ideas on what could be the cause of this?

 

[nugs]

well my 4x4 went out for some reason about a month or so ago, I changed the shift motor and it worked but now its out again. any ideas on what could be the cause of this?[/QUOT

could b the fuse, autohubs torn up, and your signature rocks!

 

[Ahteixeira4x4]

I checked all the fuses. I'm changing the hubs soon so I hope that will fix it.

 

[Ahteixeira4x4]

Ok iv been thinking about the lift that I should get. How does a 4in with 31 or 32 look? I can't really afford any bigger that that. If you have any pics I would like to see. It's in-between a 2in bl or a 4in lift. Let me know your thoughts

I will have new pics up later this afternoon.