Search results

or buy the other side :D

those of you who got that catalog, have you orederd from EE ? Maybe they sold our addresses ? 4% increase for $275.00 ???? Nah, not a worthy deal for me

there is one inherent problem with your test method. Test lights are not a 100% reliable test. You ground the test and put it on the wire. That tells you you have 12v at the connector but after the connector you still may need more information. Multi-meters are the best for such tests. I...

No, I don't say you are gonna get hearing loss because I don't have a loud system. I say that because I have studied audiology, and I work in the live audio industry ( concert sound ) FWIW I have about 17,000 watts in my concert system. easily capible of 120+ dB. yes I wear hearing...

resurrecting this thread to see if any body has come up with a way to get their glove boxes or center consoles to lock.

The MAC intake from Explorer Express is by far the most grorgous intake I have ever seen.

Why? Because you can !!!!!!!!!!!!!!!!!!!!

I just got that catalog too !!!!!!!!!!!!!!!! I wonder where they got my addy ? Any way, yeah those wires caught my eye too. Till I saw the price. WAYYYYYYYYYYYYYYYYYYYYYYYYY too costly

replace replace replace. It is not too terrible for a reasonably skilled DYI

Well I posted a thread about " Loud music etiquite " and got flamed. I posted a thread about the risks of hearing loss in association with loud music. and I got flamed. So I'll just say good luck in what ever you decide.

sand it with some 320 grit clean it with some tar, wax grease remover. Let it sit for ten to fifteen mineuts. Spray it on several thin coats and let it build. take your time between coats. Ten mineuts would be fine.

The Pioneer symbol is actually a tuning fork with the omega symbol. FWIW

Unless you have a power antena it is cake. Pop the antena base cover off and remove the three philips screws. Lift the base up, pull the antena wire off. Tie a string to it so you don't loose it in the fender. Go to a junk yard, get a mast and a base. Reverse the steps. You'll hardly...

we don't have cabin air filters. Ford must not care about those of us with alergys.

Hmmmmmm a flip chip with dual gas tankes. Now THAT is a neat idea.

The automatic ones with the brushes are aweful. I wouldn't push my neices red wagon through one of those.

One day I got caught going 75 in a 30. I told the cop I had just made a donation to the Maryland State police and I showed him my sticker which I had not yet stuck and he let me go with a warning.

Visiting some friends.

AS much as I hate to say it. Put rivits back in. They are more reliable. In addition, if I am not mistaken, I seem to recall a clearance issue one time I tried bolts.

Well here is my testamony. Prior to my Ex, I spent two years working on a 84 S-10 Blazer. I cut out all the rust, put on a cowl induction hood, a roll pan. Shaved the hatch hardware, roof rack, upper body lines, and I extended the rear of the quarters to make it look lower. $1,000.00 in...

The rivits have a steel center ( manderel ) and an alumnium body. Getting the manderal out of your way will greatly increase your progress. This is the WORST design in the automotive industry. I would like to meet the guy at Ford that decided to rivit on the glass and door handels and kick...

Nice, very through job. Nice touch painting the back side and the brackets.

you all suck !!!!!!!!!! I will be visiting Lakeland, Orlando, and Tampa areas later this month though. But then I have to come back :(

Yeah, that was my initial thought. I was just tossing it out to get a variety of input. I am sure there are many things I have never thought of.

It is called a " Sill Plate " Those things just push on. I would move the power cable over under the carpet. Sill plates tend to be pretty selfish with their space.

heat gun. Goo-Gone ( wax afterward ) If ya wanna go high tech get an ereaser wheel. Just mind your speed.

When I ran my power cable I made a new hole. I took off the right front wheel and removed the right front fender liner. Drilled a hole, primed the bare metal, stuffed in a grommet and gooped on a bit of seam sealer. It exits just below the glove box and right away goes under the carpet to the...

In two weeks I will hit the " final " phase of my sound system instal. I have one amp under the passenger seat, and I will be putting a second amp for the sub in the quarter area. Obviously I will need a power distro. Where should I put it. There is not a tremendous amout of room left under...

Ak, Looks like a scene from " Close Encounters Of The Third Kind "

Is that aftermarket " performance calibrated " MAS worht the money ?

Hmmmm that is a stumper then.

well the two are totally unrelated. Swing by a body shop and have them pull the air bag code. At most $40.00 for that. Check the brake level fluid. Some times it gets just low enough that a little bit of shoshing and it trips the light.

It will turn out fine if done right. Call some high end dealerships. Lexus, BMW, Mercades. Ask them who does their collision reapir and give them a call. Places that service those cars cater to a more discriminating cleintel and generally will yield better results. Ask about their...

Well I got it from some one else so I really can't mind.

It is a pretty involved task. not terribly difficult, but involved. It all boils down to removing all trim that holds it up. Mostly " Christmas tree " clips, philips screws and a 5.5 mm screw. Fold the rear seats flat, recline the front seats. I start from the front and work my way...

This should be in the body work and detail dept. Any way, most shops will want to remove the panels to paint them. That will get costly fast. If you remove them your self that will make a HUGE savings. I do the work but I don't price the stuff, I would guess, less than $500.00 all said and...

Looks sweet. I have the same shade rate ( ??? ) and I love it.

Oh not offended at all but thank you for appolojising. Yeah, all caps in internet jargin' is shouting.

Well, remember this if you touch the bulb wile putting it in you will blow it up in no time. Next time you put in a bulb, wipe it down with a tissue and make 100% sure you do not touch the glass part of the bulb. Look to see if there is any condesation in the lenz body. If there is...

I have had my E-Bay clear corners for several months. No yellow.