Search results

94 auto transmission valve body : this part fell out, anyone know where it goes in the valve body? the part is the same on both sides, a small cylinder with indents in top and bottom: part: https://www.dropbox.com/s/f04p08lgtcubg0r/IMG_20170916_181851041.jpg?dl=0 valve body...

i think the 2 wire colors are yellow and green (kinda dirty). i think the loom goes to the dryer cannister plug, but not sure. i have no fog lamps or daytime lamps. i was working on the condenser and later noticed this unhooked. (everything except the compressor seems to work fine).

what's a link to get the whole transmission governor assembly, possibly including the aftermarket spring? mine's an '94 a4ld automatic, and i'm not shifting when cold. even manually it sometimes takes some time (which isn't good pulling into 55mph traffic). thank you for the link, cogs

man, so many things to fix. i want to grease my driveaxle slip yoke/splines. i read about the process here, but anything to watch for? i know you grease the splines, but do you do anything special to the u joint? never done it before.

i got a new a/c switch since my blower only ran high. it fixed the blower, but now my a/c won't turn on (even though the switch description said "with a/c"). with the old, broken switch, the a/c would turn on, just only high blower speed. rockauto said they would replace it, but i threw the...

Solved low volts, battery light on 94 sport 2wd my voltmeter suddenly dropped and stayed low, with the battery warning light on, while driving. 1. battery and alternator are good. 2. car starts. 3. cleaned battery cables/posts. 4. ground connector to 2 pin plug dirty, so i cleaned. 5...

can you give the link for a radio adapter, from the original connector to a different ford radio? the original has a square connector, and the ford radio has a rectangle connector. i've seen the adapter but lost the link. i can post pics later if needed.

i'm replacing my broken blower motor switch, but i don't know how to get to it. how and what do i remove? the radio is already loose where i can get behind it.

where does this solenoid attach, and how does it attach? driver's side door:

driving cold, the temp gauge goes up to the 'm', then kicks back down to the 'o' in normal. but, when it's heated up and idling, the needle goes past 'm' (without kicking back down) all the way to 'l' and stays there, which worries me that it'll overheat. i've changed the waterpump...

Vehicle Specs lh window, door lock switch here's the situation: i work with this lady, and her husband just had a heart attack and died (at 41 years), and she has 5 younger children. she told me she has to go through the back to get into her car (it's iced over today), cause the left...

here's the situation: i work with this lady, and her husband just had a heart attack and died (at 41 years), and she has 5 younger children. she told me she has to go through the back to get into her car (it's iced over today), cause the left hand door lock switch doesn't work (the windows do...

[solved] fluid in vacuum lines/engine hiccups this is a 'point me in the right direction' question: just changed my transmission module (if interested in pictures, here's the link): http://www.explorerforum.com/forums//showthread.php?p=2352120 there's fluid in the vacuum lines, and my engine...

'94explorer sport, 2wd, auto xmission edit: changed the .png to .jpg and another server, as suggested. center console (2 phillips screws in large compartment behind exposed rectange); long rectangle step panel (2 phillips, 2 clips underneath): right panel, removed: 1 phillips...

old starter new starter solenoid since starter didn't work, replaced solenoid. starter now spins on ignition, but only engages the flywheel after many starts. my question is, will installing new brushes cause the starter to engage completely? thank you, cogs

on the vacuum ports near the firewall, i have on all the hoses, except the front right one. it's sucking in air, and i don't know where the other end of a hose(have to get one) should go. so the question is where does the opposite end of the front right vacuum port lead to? i have to fix to get...

this is what i've done: http://www.explorerforum.com/forums/showthread.php?t=216210&highlight=cogs my brakes pulse when braking only. pretty much replaced everything on brake system, and just replaced the last caliper on the passenger side. in the link given, they also suggested the master...

hi, new here: 1994explorer; when i brake, i am seriously vibrated until i stop, and near the end of the stop, the abs turns on and grabs. what i've done about it: on driver's side front wheel: replaced three rotors; changed caliper and brake hose; changed a few brake pads and sliding pins; new...