Search results

I have getting quite bad gas mileage lately, and I believe the reason is because of my tire pressure on my 31x10.5 is a bit off. I looked online and on the tire and couldnt find where it said what i should be at, so if anyone could clue me in on what the proper pressure should be that would be...

Cool, thanks guys for the great info will dot hat tomorrow. You guys are awsome. Thanks, Derek

/bump anyone got any suggestions

I took my car out of the garage, when I got into the street and put it into drive, as soon as i stepped on the gas i started to hear a rattling/shacking noise, the thing is it shifts just fine with no problems, that sounded like it was coming from the undercarrage, and happened right when I put...

What was the loose change sound for you? Did you ever find out what the metal piece was from?

Thanks alot for your guys input. I will get under there this weekend and try to see if I cant find out what is wrong

I am not quite sure how to explain it, but here goes. It sounds some what like there is "loose change" moving around when ever i go over a bumpy section in the road, or a man hole, or something like that. If anyone has ever had this problem, or think they might know what the problem is, can...

I have been having trouble trying to get the vacume line on the break booster off. Any suggestions would be greatly appericated. Thanks, Derek

Not quite sure where the vacume line is connected to the throttle body at. If someone could post a pic it would be greatly appericated. Thanks, Derek

/bump Any opinions would be appericated.

Was considering getting either an Ifab or KKM Intake for my 1991 X. The Ifab Includes the tube as well as the cone air filter, where as the KKM is only the Cone Filter. Which one would you guys suggest? Also if any of you guys have had any experience with either could you please post it here...

/bump

When I hit about 50 mph, no matter what my RPM's are at, I hear an extremely load rumble coming from the engine compartment. Has anyone had this problem? Any help would be extremely greatful. Thanks, Derek

/bump...Anyone have any other suggestions? I checked my brakes and they look just fine. Also my bearings were just changed no more than 3k miles ago. What part exactly of the hubs would u be refering too? Thanks, Derek

/bump

I have recently started to hear a rattling like sound coming from my wheels. It is on both the driver and passenger front sides. It sounds like there is loose change in my wheels, and I have no idea why. Any help on how to fix this would be greatly appericated. Thanks, Derek

The only screws to get out are the 3 on the front of the sub right?

What would be the easiest way to disconnect the stock sub? I need to disconnect it, b/c it is making an extremely annoying sound even wit th sub off on the deck it still seems to work. So any ideas would be great Thanks, Derek

I just put on some F150 Coil Spacers and Warrior Shackles, and also got some new 31 BFG A/T, so I needed to get an alignment. So i took my car to 3 different places today, Pep Boys, Firestone, and Goodyear, unfortunatly Pep Boys told me it would cost me bout $200-230 for an alignment, I said...

On a scale of 1-10 10 being the hardest, how difficult is it to change a serpentine belt, (aka fan belt.) on a 1991 Explorer? Thanks, Derek

I had to replace the lug in the bottom of the coil. The only reason was because i didnt ant to buy a 1 1/8 box wrench that was $20, that I would only use 1 time. So I tried using a cresent wrench and vice grips. If I would have used the box wrench it would ahve come off alot easier.

Does anyone have any experience with Mickey Tompson Dixie Cepek's? Also if you have had any experience how would you compare these to the BFG A/T KO's. Thanks, Derek

Does anyone have a detailed install guide on how to install a set of Hella 500's? Thanks, Derek

I just installed some Warrior Shackles and some F150 Coil Spacers. I think I couldnt have had any worse luck. It took me 2 days just to install them. I sprayed them down with WD-40, but still had trouble getting the bolts off. I broke 3 Socket Wrenches, and had to go to Ace to get new bolts...

Well thanks alot for all your help. I appericate it alot. Thanks, Derek