Search results

Greetings all! Odd series of events. My 02 has 296k mi (second engine) and had trans rebuilt maybe 120-150k back. Son is back from college and didn't know how to turn off lights, thinking they were automatic. Battery fully drained, locked with keys inside. Called AAA to jimmy the lock using the...

Greetings! Background: CEL on. P0171 and P0174 with P0401 and P0442 as added bonus! Hooked up to full version of forscan and it shows a 0 psi reading for my tank pressure. Do forscan or explorers (2002 v6 vinE) have that sensor or is mine bad or is a monumental leak likely? If anyone can make...

Hi all, I made two posts recently regarding my odd fuel pump issue...many views yet no replies (except one to myself to clarify...). Is it too odd of a problem? The truck is immovable (under it's own power) and am running out of graces borrowing friend's car...here are the posts: 2002 EB fuel...

early build 2002 with fuel pump having 8 pin connector to main harness and a 3 pin connector to the inboard side harness, anyone know what the three wires do ? Four wires from inside make sense; two for power and ground to pump and two yellow to fuel level sensor. A Can anyone help? Thanks in...

Greetings all! Several years back, replaced fuel pump, all was well. Now a overly detailed history of current situation: late last year, was nearly out of gas and got a few gallons from a station with paper signs saying no gas and tanker was filling their inground tanks. Had no choice due to...

Greetings! Would have loved to have had this without too much digging so to help the community, here is what I came up with: Upper Ball JointToWheel Knuckle Pinch Bolt And Nut 66 ft.lbs. Upper ArmToFrame Bolt And Nut 98 ft.lbs. Upper ArmToFrame Bolts And Flag Nuts 59 ft.lbs. Upper Arm...

Looking up from the underside (as easy as that is!) there is a circular indentation near the low point of the tank of my 02 V6 early build eddie bauer. I would guess that's where the fuel pump sits...always been a trust but verify type though. Does anyone have first hand knowledge? Very tempted...

Have ~2qts of Pennzoil 80-140 Gear Lube. Saw someone suggest 75-140W synthetic...can they be mixed if that is currently in my differential? Or should I drain & refill (obviously a better sol'n but more involved) . Trying to tackle only a couple of things at once...thanks again to all!

Moving on from the U-joint question...my main driveshaft has the dust boot which apparently allows the sliding of the shaft while moving. I removed the four bolts from the back flange to differential and got it separated and held up shaft with jack. The front connection to the trans seems to be...

Suddenly get a clunking sound, almost like a semi flat tire while driving. Only occurs while accelerating but if I let off gas and coast, the sound goes away. Initially thought it may be U joints on main drive shaft but supposedly they were replaced when trans was rebuilt about 3mos ago...they...