Search results

Yes, that is OBD-I live data as the bosch displays it straight out of the box. There's more data it also displays live not pictured.

Just updating the thread, I'm selling my explorer, so the next sucker in line (my brother) can f*ck with it now haha

Looking on dealing with junker/wrecked vehicles for some supplemental income... thats another story My question is if I can use a two wheel tow dolly or a full auto transport trailer, and tow another vehicle up to 100 miles with my explorer? Its a 1994 5 speed swap, 3.23 gears (note: i do have a...

Yes and its a 5 speed swap... come to think about it my issues started when I did the swap. I woke up more level headed this morning, updated the title of this thread to something a little more mature, and went outside to disable the parking brake on that wheel. 1991 sploder, I will look...

My apologies for the rather harsh title, I'm tired of trying to fix this to no avail. I've been fighting it for 8 months now. I drive and the drivers side rear brake gets hot as hell, I've warped two brand new drums to the point of being unusable. Its the parking brake dragging... and I have no...

I'm going to go out on a limb and say you got the wrong thread on accident?

Yeah, sorry. Got em installed, truck runs better than it has in a while. No pics, sorry. Didn't take any when I did em. Tip to a beginner though, if the rail is not seating all the way down to the lower intake, and the injectors are not sliding into their holes, take the fuel rail back off and...

what style wheel cap is designed to go on these wheels? Got them on an explorer without the caps

last misfire I had was just like yours or it started out that way at least. Ended up being dirt in the fuel and it destroyed the fuel pump and injectors I second the notion of checking fuel pressure

Welp I just went and took a look It's not in as good of condition as I thought Seems all the filter or foam filler you talk about is gone in this one on the top half I apologise for my poor memory It was 6 months ago when I last laid eyes on the thing

I have a 91 leather wrapped wheel in good condition that I removed from my parts vehicle i parted out. I'll grab some pictures later, and double check condition. I'd be willing to send it on the cheap.

Thank you guys, thats what I needed to hear. Now I hope I can bench bleed one properly the first try, but we will see. Thisll be my first experience with clutch hydraulics.

so I did a M5OD swap on my 94 Swap came from a 91, which coincidentally was a swap as well. I didnt swap any hydraulics out because they were new. I found out afterwards a 91 master does not work with a 94, but i made it work by bending the shaft that goes from the pedal to the master But its...

Just thought I'd update this. I sanded with 320 grit sandpaper, then 600 Then cotton buffs on a drill starting with black emery and finishing with brown tripoli Final polish was done with Mothers aluminum polish on a cotton puff on a drill I attached a before and after It looks great as long as...

For those of you reading this thread to fix your own wheels, use a pressure washer on the paint stripper rather than a putty knife. Much easier.

Currently stripping the clear coat to sand out the pitting, and I found another reason to hate the Obama administration. Removal of Methyl Chloride made aorcraft stripper useless. Currently trying to find a good product to strip the wheels.

if there's a better section for this please let me know I have these wheels, I like them alot and I want to use them when I get larger tires, but they're corroded all to hell. Picture is misleading, its pretty bad. Anyone know how to re-finish them?

Injectors arrived, they look great, almost like brand new. I'll update once I get em installed... crossing my fingers this will be the end of my running troubles.

Thats great, I'm definitely interested in buying. Just let me know :D

So I did a little online calculators 3.55 with 31s has only slightly higher rpms than 3.23 with 235s Essentially it will make the 31s feel the same power-wise as stock tires. If i decide to go 3.73 one day then perhaps If anyone has a set of 3.73s they could go without though...

It's a stick, it's a daily driver with occasional off road use. Towing a john boat sometimes, estimated weight between boat and gear is ~1000 lbs Infrequently tows heavier loads, but not often. Going to be moving sometime soon, itll see quite a bit of weight behind it then

So a trip to the tire shop for a hole patch turned into a new set of tires :rolleyes: Going with the BFGoodrich K02s in 31x10.50r15 size I plan on either a 2 inch lift, or if they fit the front without rubbing ill just do an AAL in the back to give a little rake for a more aggressive look. My...

Thank you so much, ill be purchasing this set. Glad to see I aint gotta shell out $250 on rockauto.

If you could find the seller, I'd greatly appreciate it :)

They look different, but say they're for the right engine. Why do they look different than the ones im running right now?