Search results

Look on the forum, there is a post somewhere where they tell you which wire to cut from the computer to remove the annoying warning. I went for the KYB shocks and I love them. Very comfortable and smooth. It will be a bit lower. I did the torsion bar twist, shackles, body lift 3", rear...

Here is my bad boy! Warrior shackles, Add a leaf, 3" body lift kit, Torsion bar mod, KYB Monomax shocks, rubber gap guard, 4 tow hook, front push bar and grill, dual Hella driving light, clear corner and many more goodies! BTW running on BFG 33" on 16" rims.

Here is my bad boy! Warrior shackles, Add a leaf, 3" body lift kit, Torsion bar mod, KYB Monomax shocks, rubber gap guard, 4 tow hook, front push bar and grill, dual Hella driving light, clear corner and many more goodies!

Hello guys, here is my bad boy: Finally they are on. It drives really nice, not noisy and not too stiff even if its a D load range. I am running 285/75R16 and with the mods I have I do not rub at all. No trimming required, this is the best rig for me. It looks pretty sweet and...

ok thanks for all the help I choosed to go with the BFG All Terrain Load Range D I did some research and found out that the Trxus are wearing out much quicker than the BFG and I heard they are often hard to balance and bad for highway. I will go 285/75R16 as suggested. I will post pic when they...

The Super Swamper Trxus MT looks also really nice and are suppose to handle great on ice. They only do that size in the E load range. Would that still work on my explorer, or its too heavy? I was able to get the BG AT in D load range. The Trxus just look so much meaner.

ok thanks, I will do some search for that. I am still not sure about the model. I really like the aggressive look too. Does anyone tried the Mickey Thomson Baja Radial MTZ? Just wondering how good they do on ice, and how long would they last. I also really like the look of the Toyo Open...

Yes I just checked again, I got the L from the other column. For Axle it says 42 right under it. So I got: 42 - Conventional - 3200 lb. Capacity - 4.10 Ratio Good to hear, it sound likes a pain to change gears. I think I got auto lockers right now. What are the lunchbox? never heard of it...

Ok i just checked on my door jam. It says axel L42. I checked the codes from the list: 43 Open 3.08 41 Open 3.27 42 Open 4.10 46 Open 3.73 45 Open 3.55 D4 Limited Slip 3.73 D2 Limited Slip 4.10 L73 Limited Slip 3.73 Would that mean I have that? 42 Open 4.10 Not sure why it says L at the...

thanks for the feedbacks. Seem like I should go with the 285. We basically have the same mods Rolla, and the same truck so it should fit. The 285/75R16 are only 32.8x11.2 You are running 33"x12.5 and had very minor trimming which you said might not even been necessary. I feel like the 285...

Here is more pics including the mods and better shots of the wheel gaps: Front body lift block: Middle body lift block: Rear body lift block: Warrior Shackles & Add a leaf kit: Front wheel gap: (also did TT) Rear wheel gap: My actual tires are 255/70R16 Does it look better now...

cleaned up the IAC as mentionned in one of the post here. I used WD40, then I dried it with an hair dryer. Then I cleaned the throttle body plate and section around as you mentionned. I reinstalled everything and it worked. Awesome!!! thanks for the tips, it was a cheap fix. Did that once, I am...

Hey guys, I am having a big problem. I went to the mall everything was fine. Then I came back, tried to start the truck and the engine dies right away. When I press the gas its ok, but as soon I release my foot from the pedal it die. It did that only once before, then I pressed the gas...

Its probably the camera angle, cause I have it all installed ;) But also I am not on stock tires, I am running on 31", so thats probably why there is less gap. Your truck look great with the 285/75R16. I just hope it wil clear my sidesteps ok.

If you were able to put 33x12.50R15 with very minor trimming on your EB. I should be able to fit 285/75/R16, thats only 33x11.50R16 so it shouldnt require any trimming since its not as wide. Anyone else running 285/75/R16?

Maybe because I am already running 31". Fills up the gap more.

Hi, I do mostly highway milleage. Its more important for me to be good on snow/ice. I only do trails once a time and when I go hunting/fishing. Nothing hardcore and no rock climbing, just need something good overall in any season/terrains. I would like something that also looks good with my...

Hi guys, I had my truck done a few weeks ago. They did: -3" PA body lift with Steering extension, remounted Bumpers -Add a leaf kit -Torsion Bar Twist -Warrior Shackles -KYB AGX Shocks (Replaced Air Ride Control) -4 corner Tow Hooks -4 New rotors & pads -Complete direction redone...

Hi guys, I got all my gear to install the lift on my 97 Explorer Bauer. I bought: W.P. Warrior "FORD EXPLR RR 1-1/4" LIFT" Style: 153 Explorer Pro Comp Add-A-Leaf Kit Style: 13120 PRA-6732 Gap Guards, Urethane, Black, Ford, Ranger, 4WD, Set of 4 PRA-PA-853 Body Lift, 3 in...

ok awesome Then I just replace the shocks with the regular ones. What else would be recommended to do? should I pull out the ARC fuses in the box? or remove the air lines I got the wiring diagram of the console station, so I can cut that wire and the error message for ARC wont show...

please help??? how do I install reg shocks? Do I just disconnect the air lines from my current ARC or I have also to turn off the compressor, need your advice thanks Pat

Hi guys, I have a 1997 Ford Explorer Eddie Bauer 4.0 SOHC. Since a few weeks I kept of hearing a squeak squeak coming from the front passenger side. Since I was off work this week end and the ice is starting to melt here in Canada LOL I took a look at the truck. My front passenger side...

very nice Explorer! I love the lift, looks just perfect. Once you put 33" it will fill up the holes better. I have 31" right now too, I will wait until spring to get new tires. Thanks for the info

thanks for the info, it look like I found my tire size 305/70-16 Tread Width (in) 9.8 Tire Diameter (in) 32.73 Section Width (in) 11.1 How much lift the add a leaf kit will add to the rear approx? If its like 1.5" , maybe I wouldnt need the shackles since I will do the front...

I want something similar to this. I am not sure how much he lifted it, or the tire size. Maybe only the 3" body lift would be enough to look like that, with 31" tires. What do you think?