1992 retrofit of 1994 Front ABS

[ironbandit]

Pics into the writeup

Just as soon as I have someplace to stow the pics of this job, I'll edit the post to point there.

 

[ironbandit]

Putfile

If you upload pics to putfile and other sites you can directly link them and they will work ok...

Ah ha, if you'd put PUTFILE.COM there I woulda caught on quicker...

 

[DeRocha]

Ah ha, if you'd put PUTFILE.COM there I woulda caught on quicker...

Sorry I was at work and only had time for a quick reply.. Putfile.com

 

[ironbandit]

Putfile went away, but Dropbox didn't. Now, I just have to figger out how to point at the Public folder that I have in Dropbox...

I lost all of the photos that I had collated to document this thread, but maybe my ground-up rebuild of my 1992 4.0L OHV engine will keep the photos that I'm taking of it.

 

[ironbandit]

I am back, still waiting to hook up the final electrics to power the 4WABS. I may take care of that when the engine is out of the way, later this summer. As I explained in another thread, I had a suspected connecting rod cut loose and punched a hole in the oil pan on the driver's side.

Just the 6 wires going to the control module and 4 more to the rear ABS need hooked up. One of the CM wires is to the cabin fuse panel, and that needs to be done with care.

I'll be back, after the engine is out, and that is waiting for the engine of my 1991 Nissan 240SX to be overhauled and back in THAT vehicle. It is currently occupying the engine stand.