bud4ya
Active Member
- Joined
- October 3, 2006
- Messages
- 53
- Reaction score
- 0
- City, State
- NH
- Year, Model & Trim Level
- 98 XLT V8 AWD
I have a 1997 Ford Explorer AWD, Auto with over drive, V8. The problem that just started happening is when I start off from a stop the RPM’s will go up to 3,200 RPMs before it shifts. Note this is under light acceleration. Typical when I step on it normal it goes up to about 2K RPMs and then shift and the RPM’s go down to 1.5K.
Last time I brought it to the mechanic and left it they called back and said it was not doing what I said. I picked it up and it ran fine for weeks until now.
Do you think it is the tranny, vacuum line for tranny or is there a speed module or something that needs to be replaced? I am far from a mechanic so these are just guesses.
I tried searching to see if other have had this prob and the fix and cannot find anything.
Any suggestion would be appreciated
Thanks
Last time I brought it to the mechanic and left it they called back and said it was not doing what I said. I picked it up and it ran fine for weeks until now.
Do you think it is the tranny, vacuum line for tranny or is there a speed module or something that needs to be replaced? I am far from a mechanic so these are just guesses.
I tried searching to see if other have had this prob and the fix and cannot find anything.
Any suggestion would be appreciated
Thanks