2nd Gen Body Kit & Flares on 1st Gen

[fiftyfordfloored]

OK. I'm going to the yard this Saturday and I'm going to be looking around for a few 2nd Gen parts to put on my '92 to make it a little slicker looking. I'm converting the door handles over from black plastic to painted 2nd Gen, and I'd also like to find the Stock 2nd Gen body kit/ground effect/fender flares (what ever it's called) pictured below. (Assuming I can find one):

Does anybody have a picture of a first gen with this kit on it? I've never seen one on a 1st Gen before and it looks great on the 2nd gen. I just want to see if the look works on a 1st gen before I consider stumbling off into that project (drilling 4 billion holes, etc). If anybody does I'd be very happy.

 

[Trckmagik]

Here is my first gen with the 2nd gen running boards and fender flares.

Hope this helps.

http://www.nukinfutz.com/forums/forum_posts.asp?TID=1466&KW=1994+explorer

 

[fiftyfordfloored]

Thank you so much, I've been looking for ages to find a picture thread like that. You did exactly what I was thinking of doing too (painting the flares/trim to match the body). Awesome truck

 

[Stic-o]

Here is my first gen with the 2nd gen running boards and fender flares.

Hope this helps.

http://www.nukinfutz.com/forums/forum_posts.asp?TID=1466&KW=1994+explorer

Brian what did you ever with the steering wheel you removed? It would look nice in my B2

 

[jimbo74]

i was going to say should be a fine swap, the bodies are the same from mid fender area to mid fender area

 

[ghoster]

wow that looks 100000000000x better!!!

 

[stev0n]

hate to bring up an old thread, but do the flares from the 98 match up with the flare of the stock fender? because it looks a little off in the pics. But that could just be me.

 

[daveydavido]

I already have running boards on my eddie bauer, will the flares still fit on or do i need to take the running boards too.
will it sit flush if i just use my running boards???