bigDerk
Well-Known Member
- Joined
- February 11, 2001
- Messages
- 522
- Reaction score
- 0
- City, State
- Stockbridge, GA
- Year, Model & Trim Level
- 2001 Ranger Edge
I know that you can lift the newer models with lift spindles, does this work on all 95+ models or only specific years?
Also, I know that spindles such as the Camburg spindle for the 98+ 2WD Rangers increase the front track width by 1.5" on each side. Do other spindles (Fabtech, Explorer Procomp) do this as well? I'd prefer the stock track width, I don't like the front wheels to stick out wider than the rears.
My reasons for asking is that I think I wanna save up for a 97+ 2WD Sport (what I was originally gonna save up for before I bought the Ranger, shoulda stuck with Plan A...
), and I'd probably want to do a 3" lift up front (probably a 1" torsion twist too) with a 4" spring in the rear, probably running 32x11.50's on some 15x8's. This won't be for at least a year or two down the road (probably more, still gonna do some more mods to my 94), I'm just bored and feel like dreaming a bit. 
Also, I know that spindles such as the Camburg spindle for the 98+ 2WD Rangers increase the front track width by 1.5" on each side. Do other spindles (Fabtech, Explorer Procomp) do this as well? I'd prefer the stock track width, I don't like the front wheels to stick out wider than the rears.
My reasons for asking is that I think I wanna save up for a 97+ 2WD Sport (what I was originally gonna save up for before I bought the Ranger, shoulda stuck with Plan A...
), and I'd probably want to do a 3" lift up front (probably a 1" torsion twist too) with a 4" spring in the rear, probably running 32x11.50's on some 15x8's. This won't be for at least a year or two down the road (probably more, still gonna do some more mods to my 94), I'm just bored and feel like dreaming a bit. 
