32 11.50's in Colorado

[rockymntnhi]

? ? ?

The verdicts in ! Thought you already said 32's won't fit and you had to go w/ 31's ??? So I take it you don't know YET ???

 

[Heath]

Well I went over there yesterday and they test fitted a pathfinder something or other on there instead of a BFG M/T... Do you guys think I should have them fit one of those up there before I buy??? I mean I could deal with 31's... When they had that pathfinder on there it rubbed pretty bad just turning let alone if it had to be under compression... I'm thinking maybe I should just buy the 31's and see how they do... Then the next time I can try for 32's if the 31's seem to have a lot of clearance...

 

[mattadams]

Heath, if the pathfinder rubbed BADLY I'd say you won't have much luck with any 32... if it rubbed slightly I'd say sure try it, but if it was rubbing bad you could take away an inch and it'd still rub...
and remember, by busting your ass and grinding and so forth to get 32"s under there, you're only getting an additional 1/2" of ground clearance over the 31"s.

 

[Heath]

Well they rubbed on the plastic panel where your BFG got stuck when I tried that one on... I mean with that gone it wouldn't have hit... But that was just sitting there on the ground... So I'm thinking that under compression it would be REALLY bad...

 

[rumney510]

Heath

If you trim the front fender they will fit OK.

HOWEVER if you disconnect the front swaybar they will rub under compression, on the sheet metal around the tire rim.
If you disconnect the rear swarbar they will rub under rear articulation against the wall.

Others have posted that 32x10.5 don't rub.

andy

 

[Heath]

Hmmm... 32x10.50's... There's something to think about... And I believe there is a TSL in that size...