4*4 CM question

[02 trac]

I have a 2002 trac tried to use 4*4 this weekend and didn't work did some looking around on this site and found some things to check for switch is good i check it with a ohms meter the inside prongs are the one i checked it with my next problem is the 4*4 lights don't come on at all even when i start the truck plus when i try to switch it to 4*4 it makes no sound or click Ive read on some post that if it click then that means the 4*4 CM is what is bad any help would be great the weather is getting bad here in OHIO

 

[brianjwilson]

I can't hardly understand that cluster of words without punctuation.
Did you test the electrical connector on the transfer case motor itself? Have you checked all fuses and relays?
Here is some info on servicing the transfer case motor.
http://www.therangerstation.com/tech_library/TCaseshiftmotor.htm