crazymind
Well-Known Member
- Joined
- June 15, 2011
- Messages
- 192
- Reaction score
- 1
- Year, Model & Trim Level
- 99 mountaieer 4.0
okay so my trans has 193,x.. on it and in the past week from backing out of a parking spot than shifting into drive it decides that it doesn't want to go any were. I pull the codes and what pops up it torque converter clutch and solenoid A and B. what happens is while shifting to drive the whole car jerks backwards than when i go to push the gas it sounds like its bogging and the engine doesnt go above 1,500 rpm, and the car just rolls which ever way the incline is. That's the problem but after i shut down the car for a few moments restart and go back into drive, she runs fine like there is no problem at all. i know i might have to throw some money at it but with this kinda mileage should i just go ahead and rebuild the whole thing, or would it be as simple as the gaskets blowing on the valve body.
thanks for taking time to read and express what you think
thanks for taking time to read and express what you think