91 ranger no 4wd

[Parker60]

I havd a 91 ranger 5 speed 4wd with locking hubs and the 4wd quit working i have checked the fuses and did the module test it blinked 4 times then shut off like its supposed to but when i push 4hi or low button nothing happens no lights come on and the module doesnt click and i just replaced the transfer case motor last year can someone help? Or have any suggestions?

 

[Parker60]

Also tryed a different working switch

 

[colintrax]

Sounds like a bad switch to me, are you sure the wiring to the switch is good?

 

[Parker60]

I think so it was working fine i used 2 day before it quit working and then just nothing

 

[Parker60]

How do i test it

 

[RangerX]

Possibly some info you could use in this thread: http://www.explorerforum.com/forums/showthread.php?t=202166

 

[Parker60]

How do i make sure wiring to switch is good cuz it seems like its just not sending power to module or may b i missed a fuse?

 

[colintrax]

Grab a multimeter and check continuity