95 V6 EGR Vaccum Hose Help(picture)

[Jeff Luce]

I need some help with the vaccum hose routing to the EGR, If anyone can take a picture of theres it would help out alot... Problem is after I did my intake gaskets I must have messed up the lines(they were all brittle so I replace the cracked ones with hose) The Vaccum diagram is not a huge help

Here is a link to the picture I have:

PHOTO
1995 explorer v6 VIN X

E-Mail Me Pics Here

 

[Turdle]

this has good pics toward bottom

http://www.explorerforum.com/forums/showthread.php?t=150433&highlight=dpfe+sensor

 

[Jeff Luce]

thanks

The pic is of a different year.. It may halp a little but If someone could take a pic of your vaccum hose routing from intake to egr like my pic I would greatly appreciate it..

Thanks

 

[Turdle]

It is the same, however the tubes have been upgraded to metal in the lower pics in thread link I gave you.

They connect the same

 

[Turdle]

oh
I see now

red goes to fuel pressure regulator

green to egr valve

I think you have the 2 reversed in your pic