Bmwz389
Well-Known Member
- Joined
- March 1, 2005
- Messages
- 298
- Reaction score
- 1
- City, State
- Iowa
- Year, Model & Trim Level
- 1992 XLT
This is off the alpine website:
MAX Power (at 14.4V,EIAJ)
Brigded into 2 ohms : 700W x 1
RMS Power (at 14.4V,20Hz-20kHz)
Per channel into 2 ohms : 350W x 1 (0.3%)
Per channel into 4 ohms : 200W x 1 (0.08%)
Now, I'm getting 2 Kicker CVR15 that do 500 RMS/1000 MAX
so can I use my Alpine M350 amp to push one of the 2 subs I'm getting?
Its a DVC (4 Ohms per VC). So if I wire the 2 voice coils parallel into 2 ohms could I run it to the amp as 2 Ohms @ 700 Watts? But keep the gains down?
MAX Power (at 14.4V,EIAJ)
Brigded into 2 ohms : 700W x 1
RMS Power (at 14.4V,20Hz-20kHz)
Per channel into 2 ohms : 350W x 1 (0.3%)
Per channel into 4 ohms : 200W x 1 (0.08%)
Now, I'm getting 2 Kicker CVR15 that do 500 RMS/1000 MAX
so can I use my Alpine M350 amp to push one of the 2 subs I'm getting?
Its a DVC (4 Ohms per VC). So if I wire the 2 voice coils parallel into 2 ohms could I run it to the amp as 2 Ohms @ 700 Watts? But keep the gains down?