Amp wiring help

[MDmounty]

So I've got a pa system and I'm trying to get it hooked up to my amplifier. But the problem is that there is one harness on the back of the system with 4 wires: a ground, a 12v power, a positive speaker wire, and a negative speaker wire. And I don't really have any idea how to connect those speaker wires to an amp. I'd appreciate any help

 

[joecrna]

Depends on the amp. What inputs does it have? What is it for? Car stereo?

 

[MDmounty]

Yeah its an amp for a car stereo and it's got the red and white inputs and it has a harness on it that says high on it I think and that harness has 2 black and 2 red wires on it

 

[joecrna]

By input type, I mean RCA or wire screws etc. Also, are you certain which are inputs vs outputs.

 

[MDmounty]

By input type, I mean RCA or wire screws etc. Also, are you certain which are inputs vs outputs.

The input is RCA and there is a small harness on it that's labeled high input and has left and right positive and negative wires. The output is screws

 

[joecrna]

The high input is what you want. Thats what I was looking for from you. attatch the PA out to those inputs.