CuzRocka1980
New Member
- Joined
- January 24, 2012
- Messages
- 4
- Reaction score
- 0
- City, State
- Long Island, NY
- Year, Model & Trim Level
- 2009 STA
Afternoon, I have a 2009 Ford Explorer Sport Trac with Factory Nav with Sync. I have been searching for about 4 days now and all I have found is the wiring diagrams from AutoZone.com which are not really that helpful being that everything is not laid out in one nice diagram. Anyone have a nice diagram of the Audio wiring?
Anyway, so my plan is to install the following (keeping the stock HU):
Audision BitOne.1 SP
Hertz HSK-165 XL Components up front
Hertz ECX-570 for the rear doors
Two 10" Hertz ES 250 subs
All powered by a Hertz HDP5 Amp
I am trying to figure out:
1. If the Amp in the rear powers all the speakers in the car or just the factory sub.
2. I never hooked up a BitOne before so please bear with me. For the BitOne, do I only need one speaker output wire from my stock HU to signal the BitOne or do I need all four speakers + the sub wires to go into the BitOne? Trying to figure out if I will be wiring to the Preamp'd side of what. Confused here.
3. Should I rewire all the speakers from the Hertz HDP5 Amp directly?
Thanks for any help in advance,
V.
Anyway, so my plan is to install the following (keeping the stock HU):
Audision BitOne.1 SP
Hertz HSK-165 XL Components up front
Hertz ECX-570 for the rear doors
Two 10" Hertz ES 250 subs
All powered by a Hertz HDP5 Amp
I am trying to figure out:
1. If the Amp in the rear powers all the speakers in the car or just the factory sub.
2. I never hooked up a BitOne before so please bear with me. For the BitOne, do I only need one speaker output wire from my stock HU to signal the BitOne or do I need all four speakers + the sub wires to go into the BitOne? Trying to figure out if I will be wiring to the Preamp'd side of what. Confused here.
3. Should I rewire all the speakers from the Hertz HDP5 Amp directly?
Thanks for any help in advance,
V.