Ball Joint Spacers

[armysoldier30263]

http://www.camburg.com/ford/raptor/ford-raptor-uniball-upper-arms/

these are for raptors but WTF?!? 1k for upper arms ??? ill stick with stressed ball joints ... i hope brandons arent going to be that expensive

 

[carlover]

I've talked to brandon a little on these arms for you guys. They wont be $1,000 thats for sure. He was trying to figure out ways to keep costs down to keep them fairly priced.

 

[xplorerguru]

I've talked to brandon a little on these arms for you guys. They wont be $1,000 thats for sure. He was trying to figure out ways to keep costs down to keep them fairly priced.

sounds great!

 

[lynchy wa]

I've talked to brandon a little on these arms for you guys. They wont be $1,000 thats for sure. He was trying to figure out ways to keep costs down to keep them fairly priced.

Thank's mate!!!!

 

[armysoldier30263]

thats awesome ... did he give you a round about idea of cost?

 

[Wills05xlt4x4]

Shop I emailed seemed very interested in making our uppers thy said they will make them but will need five ordered and THEY WILL MAKE THEM FOR US!!!!!!!!
550 is how much he quoted me with a uniball and yes it will be longer.....
Who wants them..

 

[Ronin8002]

are they test fitting them on a truck with a strut spacer lift first?

 

[Wills05xlt4x4]

are they test fitting them on a truck with a strut spacer lift first?

I'd assume so I told them about our ball joint issues with any lift

 

[n.gardner]

Subscribing.
Posted via Mobile Device

 

[Brandon@BTF-fab]

http://www.camburg.com/ford/raptor/ford-raptor-uniball-upper-arms/

these are for raptors but WTF?!? 1k for upper arms ??? ill stick with stressed ball joints ... i hope brandons arent going to be that expensive

They will be about half of that. I just confirmed a guinea pig truck coming in the weekend of April 23

 

[armysoldier30263]

They will be about half of that. I just confirmed a guinea pig truck coming in the weekend of April 23

that sounds better ... i dont offroad in my x but i still want to get them to try and stop that particular issue with the ball joints down the road

 

[lynchy wa]

Awesome news!!!

 

[3rdGenExploder]

Subscribed
Just got some RB 2.25/2 spacers. should be interesting if us 3rd gens could get a legitimate lift now.

 

[Ronin8002]

They will be about half of that. I just confirmed a guinea pig truck coming in the weekend of April 23

Awesome!!

 

[n.gardner]

They will be about half of that. I just confirmed a guinea pig truck coming in the weekend of April 23

Does this truck have spacers ??
If so what size ??

 

[armysoldier30263]

Does this truck have spacers ??
If so what size ??

good question ... this does matter lol

 

[Brandon@BTF-fab]

Haha, I'll be basing the arms off an exponwith my 2.25" Spacers.

 

[clarks2001]

Haha, I'll be basing the arms off an exponwith my 2.25" Spacers.

Is this for front and rear? I hadn't looked into spacers until I came across this posting and the fact that I found out today that my rear springs have broken right on the bottom seat of where the coil mates up to the strut. Sooo with that in mind, I am considering a spacer lift. Just need to know if I can get the quick strut from monroe and use a spacer lift with it lol. I plan on just doing all 4 corners as the truck is still riding on factory assemblies

 

[armysoldier30263]

Is this for front and rear? I hadn't looked into spacers until I came across this posting and the fact that I found out today that my rear springs have broken right on the bottom seat of where the coil mates up to the strut. Sooo with that in mind, I am considering a spacer lift. Just need to know if I can get the quick strut from monroe and use a spacer lift with it lol. I plan on just doing all 4 corners as the truck is still riding on factory assemblies

shouldnt be a problem as long as you dont use a quick lift strut assembly and lift spacer

 

[Ronin8002]

Haha, I'll be basing the arms off an exponwith my 2.25" Spacers.

Would these still work for a set of 1.75" spacers do you think?