bats
Elite Explorer
- Joined
- October 30, 2009
- Messages
- 822
- Reaction score
- 48
- City, State
- NY
- Year, Model & Trim Level
- 88 Bronco II
Things are moving along quite nicely now. The Bronco is but a shell of it's former self. Literally. The engine and transmission are gone. The interior is still inside, but it's not bolted down to anything.
Degreased and power washed the engine bay. It took two bottles of degreaser to cut through all the crap.
As for the Explorer, trans is almost out. Heat exhaustion this afternoon made me pack it in early.
At this point I plan on lining the inside of the Bronco with some POR 15 since the firewall was starting to disintegrate. Then I'll put down sound proofing material before putting the dash back together.
Once I have the A4LD out of the Explorer, I'm going to have it built up. Transgo kit and rebuild. I'd rather not have to pull another one any time soon.
As for the engine, the 4.0 ran pretty good and didn't really burn oil so less will be done to it. Definitely freeze out plugs since two have already been replaced.
Degreased and power washed the engine bay. It took two bottles of degreaser to cut through all the crap.
As for the Explorer, trans is almost out. Heat exhaustion this afternoon made me pack it in early.
At this point I plan on lining the inside of the Bronco with some POR 15 since the firewall was starting to disintegrate. Then I'll put down sound proofing material before putting the dash back together.
Once I have the A4LD out of the Explorer, I'm going to have it built up. Transgo kit and rebuild. I'd rather not have to pull another one any time soon.
As for the engine, the 4.0 ran pretty good and didn't really burn oil so less will be done to it. Definitely freeze out plugs since two have already been replaced.