blinkers not working...both sides

[bradsx]

my blinkers are not working,both sides. Is there a fuse? i do not have a owners manuel for my truck. it worked for my quick trip to the store but did not work on way home. puzzled???? i can not tell is bulbs bad because it i dont see anything from outside??

thanks

 

[TechGuru]

my blinkers are not working,both sides. Is there a fuse? i do not have a owners manuel for my truck. it worked for my quick trip to the store but did not work on way home. puzzled???? i can not tell is bulbs bad because it i dont see anything from outside??

thanks

1997? You're in the wrong section.

Owners manuals are available for free online here:

http://www.fleet.ford.com/partsandservice/owner-manuals/

Have you tried your hazard lights?

If it's not a fuse most likely your flasher unit has gone bad.

I know this fits the 3rd gen.

http://www.oreillyauto.com/site/c/detail/NOV0/EP27/01546.oap

That one is compatible with both incandescent and LED's should you decide t upgrade to LED's in the future.

 

[bradsx]

oops......its a 2005 ex.....just i didnt update my profile.

thanks ill download a manuel, and no i didnt try hazards

 

[turborich]

2004 here, Mine just recently started to stop flashing intermediately. Light will just stay lit up but sometimes won't flash. Haven't looked into but I'm assuming there isn't a flasher and it's probably located in the body control module???

 

[TechGuru]

2004 here, Mine just recently started to stop flashing intermediately. Light will just stay lit up but sometimes won't flash. Haven't looked into but I'm assuming there isn't a flasher and it's probably located in the body control module???

Motorcraft SF633 is the proper exact replacement. RockAuto has it for $17.74 and OReily's has it for $24.99.

http://www.oreillyauto.com/site/c/detail/MOT0/SF633.oap

The LED compatible one I had posted a few posts back will not let you know when a bulb is burned out. Best to go OEM unless you are actually planning to install LED's.

Helpful info: http://www.rockauto.com/info/FlasherTroubleshoot.pdf

 

[bradsx]

started working again..... i hit the hazards on and off then it started working again.... ????

thanks for info

 

[dirtcrew51m]

Turn signal relay. The hazard probably loosened it up.

 

[turborich]

Motorcraft SF633 is the proper exact replacement. RockAuto has it for $17.74 and OReily's has it for $24.99.

http://www.oreillyauto.com/site/c/detail/MOT0/SF633.oap

The LED compatible one I had posted a few posts back will not let you know when a bulb is burned out. Best to go OEM unless you are actually planning to install LED's.

Helpful info: http://www.rockauto.com/info/FlasherTroubleshoot.pdf

Thanks for the info. Good to know it's still a separate replaceable part. Since I posted about the turn signal it has been working since...