Ryan87LX
Active Member
- Joined
- June 21, 2014
- Messages
- 51
- Reaction score
- 0
- City, State
- Regina, Saskatchewan
- Year, Model & Trim Level
- 1997 Ford Explorer
I've been scrolling through posts on body lifts and body bushings.
I'm planning a 4406 swap and a 3"BL. I can pretty much guarantee that my current body mount hardware will be seized up tight.
I see the aftermarket body mount bushings, but the hardware seems to be an issue. Is there a recent development for that hardware that I should be aware of? Can I just sleeve the bushing with pipe and put a big washer on the bottom?
Most of the threads addressing this seem to be a bit old. I thought that maybe a new part or procedure might have become available in recent years.
I'm planning a 4406 swap and a 3"BL. I can pretty much guarantee that my current body mount hardware will be seized up tight.
I see the aftermarket body mount bushings, but the hardware seems to be an issue. Is there a recent development for that hardware that I should be aware of? Can I just sleeve the bushing with pipe and put a big washer on the bottom?
Most of the threads addressing this seem to be a bit old. I thought that maybe a new part or procedure might have become available in recent years.
