Bolt pattern the same as the Escape?

[Black92LX]

Just curious if our bolt pattern is the same as the wheels on the Escape.

Doubt it but just curious.

 

[jutgin]

Just curious if our bolt pattern is the same as the wheels on the Escape.

Doubt it but just curious.

Yes, they should both be 5x4.5. Metric I believe is 5x114.3.
I'm pretty sure the wheels are different sizes though. You plan on swapping wheels or something? The escape probably has 15" wheels where the Ex's have 16's or 17's.

 

[briwayjones]

Yes, they should both be 5x4.5. Metric I believe is 5x114.3.
I'm pretty sure the wheels are different sizes though. You plan on swapping wheels or something? The escape probably has 15" wheels where the Ex's have 16's or 17's.

Actually I believe all Escapes have minimum wheels of 16" while a lot of Ex's have 15" and some 16" or 17" on the 3rd gens.

 

[jutgin]

Actually I believe all Escapes have minimum wheels of 16" while a lot of Ex's have 15" and some 16" or 17" on the 3rd gens.

I'm only talking about the 3rd gen explorers, which are only 16's or 17's from the factory. Most escapes are 15's but you can order them with 16's.

 

[XtremeRanger]

Same pattern.....but it wont fit on a 3rd gen expo if they are 15's. 3rd gens need min. of 16's...

 

[Black92LX]

I was looking at a set of BBS wheels.

BBS lists them fitting the Escape but not the Explorer