brianjwilson
Well-Known Member
- Joined
- July 8, 2004
- Messages
- 628
- Reaction score
- 3
- Year, Model & Trim Level
- 98 Ranger, 05 Sport Trac
I know I know, another thread about transfer case swap questions.
I searched but had a hard time finding the answers I was looking for. I found two bronco 2's in my area that are being parted, both with functioning manual transfer cases. I've read mixed things about what will bolt up and what won't. This is for an 05 Sport trac with electric shift, by the way.
I already know I'll have some work to make the shift linkage work with the body lift, but what else is involved? I'm assuming these would both have the speed sensor in the transfer case, which shouldn't matter either, right? Will my driveshafts bolt up to the case?
Thanks for the help!
Brian
I searched but had a hard time finding the answers I was looking for. I found two bronco 2's in my area that are being parted, both with functioning manual transfer cases. I've read mixed things about what will bolt up and what won't. This is for an 05 Sport trac with electric shift, by the way.
I already know I'll have some work to make the shift linkage work with the body lift, but what else is involved? I'm assuming these would both have the speed sensor in the transfer case, which shouldn't matter either, right? Will my driveshafts bolt up to the case?
Thanks for the help!
Brian
