- Joined
- December 21, 2007
- Messages
- 1,794
- Reaction score
- 11
- City, State
- South Jersey
- Year, Model & Trim Level
- 99 Mountaineer V6 4x4
Looking for some input from the vast wealth of knowledge here on the forum. To give you a brief run down, I am swapping out my 4405 c-trac case for a 1354. The 1354 I have is an electric version and converting it to manual is a little pricey. This being said I am building a controller for the 1354 and need to know if the shift motors are different. What I mean by this is are the sensor contacts in the motor setup differently. I know the 4405 really only has 2 hi and 4 lo positions, and the TOD clutch engages for 4hi. The 1354 actually physically switches to all three ranges. My problem is I only have a spare 4405 motor to work with right now and all my tests show my controller should work, but alas no. I either have a bad 4405 motor or the two are indeed set up differently. Any input would be greatly appreciated.
Thanks.
Thanks.