Rjj
Member
- Joined
- November 7, 2001
- Messages
- 23
- Reaction score
- 0
- City, State
- Fox Valley, WI
- Year, Model & Trim Level
- 94 Explorer XLT
Thanks to all of you that helped me diagnose my Expo problems !!!
F.Y.I. I went to another part's shop yesterday looking for an inexpensive MAF. They had one but after an inspection...it was damaged also. What is it with these parts stores??? Four of them had damage screens and one had a core calling it refurbished and many didn't have them in stock. So I went to Ford... EXPENSIVE !!! But it works purrfectly!!!
The lack of power, surging, poor "first" starts, shifting problems... all are gone!!! When I push the gas lightly the Expo responds. It clearly runs better than ever!!! I would bet the old MAF was defective from the start because it always ran poorly. Until yesterday, I wished I would have kept my 91 Expo because it ran excellent... no more!!! To the poster that told me not to give up my Expo-thanks, you saved me alot of money and potential Durango Blues!!!
What is strange is that my engine light only started coming ON about a month ago but it ran poor the entire time I owned it. I tested the old MAF via the voltage tests and it appeared to work as the repair manual described it. However, the signal voltage would raise as expected but then drop slightly. This was enough to cause the poor performance of my Expo.
Thanks again !!!
ps. Any Expo/Jetboat owners are welcome to come visit my SeaDoo/Merc 240EFI JetBoater's Forum @ Dead Link Removed Threads are alittle thin given the time of year but in Spring... look out!!!
SpeedSter240EFI
Rj
F.Y.I. I went to another part's shop yesterday looking for an inexpensive MAF. They had one but after an inspection...it was damaged also. What is it with these parts stores??? Four of them had damage screens and one had a core calling it refurbished and many didn't have them in stock. So I went to Ford... EXPENSIVE !!! But it works purrfectly!!!
The lack of power, surging, poor "first" starts, shifting problems... all are gone!!! When I push the gas lightly the Expo responds. It clearly runs better than ever!!! I would bet the old MAF was defective from the start because it always ran poorly. Until yesterday, I wished I would have kept my 91 Expo because it ran excellent... no more!!! To the poster that told me not to give up my Expo-thanks, you saved me alot of money and potential Durango Blues!!!
What is strange is that my engine light only started coming ON about a month ago but it ran poor the entire time I owned it. I tested the old MAF via the voltage tests and it appeared to work as the repair manual described it. However, the signal voltage would raise as expected but then drop slightly. This was enough to cause the poor performance of my Expo.
Thanks again !!!
ps. Any Expo/Jetboat owners are welcome to come visit my SeaDoo/Merc 240EFI JetBoater's Forum @ Dead Link Removed Threads are alittle thin given the time of year but in Spring... look out!!!
SpeedSter240EFI
Rj