coil spring spacers

[RoadBully]

Good job! They look awesome!

Thanks,
I got some small ones done as well, in silver.

 

[JCUZ]

Sticker looks great! (As do the lift thingys).

 

[RoadBully]

Sticker looks great! (As do the lift thingys).

Thanks.
The one on my rear window is "3M reflective film", pretty cool stuff, it lights up pretty bright for being dark blue.

 

[SDVike]

Looks good! I would love to see the silver one. I bet it would look good on my silver EX. I am still debating on doing 2" front and back. I just don't know if the 2" will work with my QL in the front (it already has 2" of lift.)

So when you joined the site a little over 6 months ago did you think you would have your own RoadBully sticker? Did you come up with RoadBully then? I just want to know if I am witnessing the birth of the next big offroad company.

 

[RoadBully]

Looks good! I would love to see the silver one. I bet it would look good on my silver EX. I am still debating on doing 2" front and back. I just don't know if the 2" will work with my QL in the front (it already has 2" of lift.)

So when you joined the site a little over 6 months ago did you think you would have your own RoadBully sticker? Did you come up with RoadBully then? I just want to know if I am witnessing the birth of the next big offroad company.

LOL.. my wife actually came up with it.
I was thinking of what to use as a username, and she commented on how I seem to have a problem with stupid drivers... so she called me RoadBully,
It seems to have been a good choice.
And no.. I sure didn't figure I'd be making "RoadBully Off-Road" stickers... hehe.

And I'm keeping my fingers crossed about the whole big offroad company thing.
I'll fire up a pic of the small silver stickers, they're not banners like mine, but just small ones to send with the kit.

 

[RoadBully]

 

[Ford02Exp]

those stickers are sweet!

 

[RoadBully]

Thanks John.

 

[reissiga]

Anyone had any issues with alignment after installation? I am considering buying a set (2inches front and rear).

 

[corkey]

hey Ben , can i get a couple of them stickers too ??? i don't have a 3rd gen, but,,,,,,

 

[chris's2005]

How much would it cost if i were to buy the big sign to put on my back window?

 

[chris's2005]

Anyone had any issues with alignment after installation? I am considering buying a set (2inches front and rear).

I went 3/2.5 no problems yet with alignment, just a pretty good squeak over hard bumps in the front drivers side.

Chris

 

[helmsa]

I went 3/2.5 no problems yet with alignment, just a pretty good squeak over hard bumps in the front drivers side.

Chris

While the squeak could possibly be attributed to the lift, I have no lift (springs or spacers) and have a squeak as well.

 

[RoadBully]

hey Ben , can i get a couple of them stickers too ??? i don't have a 3rd gen, but,,,,,,

How much would it cost if i were to buy the big sign to put on my back window?

PM's sent to both.
Thanks for the support guys.

 

[Thelt]

A squeak over bumps is probably your sway bar bushings. It mounts to the frame behind the tire. Squirt a little WD 40 on it and see if it stops. If so that is your problem. To fix it longer term you need to pull it loose and put some grease around it. I had to do this with mine and I put some poly bushings in at the same time.

 

[chris's2005]

A squeak over bumps is probably your sway bar bushings. It mounts to the frame behind the tire. Squirt a little WD 40 on it and see if it stops. If so that is your problem. To fix it longer term you need to pull it loose and put some grease around it. I had to do this with mine and I put some poly bushings in at the same time.

Will try and post the results THANKS Thelt

 

[chris's2005]

A squeak over bumps is probably your sway bar bushings. It mounts to the frame behind the tire. Squirt a little WD 40 on it and see if it stops. If so that is your problem. To fix it longer term you need to pull it loose and put some grease around it. I had to do this with mine and I put some poly bushings in at the same time.

That seemed to help it, the squeak seems to be going away, im going to squrit some more on tomarrow. Thanks for the tip Thelt

 

[chris's2005]

A squeak over bumps is probably your sway bar bushings. It mounts to the frame behind the tire. Squirt a little WD 40 on it and see if it stops. If so that is your problem. To fix it longer term you need to pull it loose and put some grease around it. I had to do this with mine and I put some poly bushings in at the same time.

I took the swaybar totally off today STILL SQUEAKS so i put it back on. This is really starting to bother me. I cant seem to pinpoint the problem. well going back out to investigate, if you have any more tips id like to hear them

Thanks for the first idea