rocco123
Well-Known Member
- Joined
- February 24, 2002
- Messages
- 877
- Reaction score
- 11
- City, State
- Endicott, NY
- Year, Model & Trim Level
- 1994 XLT & 2002 Limited
I have an 02 4.6 with a coolant leak below thermostat. Leak is at the lower aluminum housing that spans over to the right side if the engine. I know the manifold does have to ve removed to get to the gasket (hopefully thats all that is bad). Where can I find a plastic manifold with the aluminum crossover that DOES have the pcv valve heater ports in case it is needed when this all comes apart? What are my options...doing it myself? All I see available are those that state they are not for pcv valve heat.