major
Elite Explorer<br><img src="/forums/images/star2.g
- Joined
- March 5, 2000
- Messages
- 222
- Reaction score
- 0
- City, State
- Florence, South Carolina
- Year, Model & Trim Level
- '98 V8 2WD XLT
Ive got 2 mbquart 12's that im trying to come up with a box for. currently i have them in two seperate sealed boxes against my back seat. it sounds good but im tyred of not being able to use that room and fold the seats down for long cargo. So my master plan is to build a fiberglass back wall replacement for both of the rear inner walls. the way i figure it the furthest point out of it will be about 1 to 2 inches past the wheelwell into the center or the back. I plan to have the subs pointying at an angle twards the center of the door. On paper and with a mock up it works so you may want to look into something like that if you like fiberglass. My problem is going to be covering it in vinal because ive only done that once. even with the subs there ill have room to put an amp on each side but my smaller one will be on the driver side so i can still have room to get to the jack. Hope this gave you some ideas, Major