Brock94
Well-Known Member
- Joined
- July 2, 2004
- Messages
- 553
- Reaction score
- 3
- City, State
- Milford, CT
- Year, Model & Trim Level
- 1994 XLT
Well, my clutch is slipping-- as far as I can tell it's because of oil contamination from a bad rear main seal.
I'm planning to replace the clutch (and seal) myself, but wanted your input about what is a decent clutch to buy.
I found an eBay deal for $210 +$25SH for:
1. LuK Pressure Plate
2. LuK Clutch Disc
3. OEM Release Bearing
4. OEM Internal Slave Cylinder
5. OEM Pilot Bearing
6. Alignment Tool
I'd like to replace all these parts-- is this a decent deal? Are these parts good? I don't want to spend a ton on the best, but I don't want junk either.
Would I do better if I buy stuff from CarQuest or Napa?
I'm planning to replace the clutch (and seal) myself, but wanted your input about what is a decent clutch to buy.
I found an eBay deal for $210 +$25SH for:
1. LuK Pressure Plate
2. LuK Clutch Disc
3. OEM Release Bearing
4. OEM Internal Slave Cylinder
5. OEM Pilot Bearing
6. Alignment Tool
I'd like to replace all these parts-- is this a decent deal? Are these parts good? I don't want to spend a ton on the best, but I don't want junk either.
Would I do better if I buy stuff from CarQuest or Napa?